Seepage drainage mat Manufacturers

The selection of geomembrane should be comprehensively considered in terms of engineering application, economy, construction technology characteristics and material performance. First consider whether the permeability and quality meet the requirements. Secondly, in order to prevent damages encountered during transportation and construction, geomembrane must have good mechanical properties such as anti-permeation, anti-puncture, and tensile strength. Of course, during construction, we must also take care to protect it from damage. In addition to the above points, durability and thickness should also be considered.

The geomembrane is damaged during transportation and on-site construction, which changes the destruction mechanism of the geomembrane and affects its anti-permeability and stress performance. The composite geomembrane uses hot melt technology to bond the membrane to the cloth. The bilateral geotextile can effectively protect the geomembrane from damage. However, in the process of manufacturing and building connection, hot melt technology will inevitably cause thermal burns and defects of the soil membrane, which has the hidden danger of preventing penetration.

I don’t know if you have noticed that when you apply an impermeable membrane, you can often smell the odor formed by the impermeable membrane.

1. Polyester non-woven fabric is the golden partner of drainage board, which can filter water and hold the soil layer. The colors are generally black, yellow, white, gray, etc. Minimum specifications: width; 2 meters, 100 meters long. 2. Polyester non-woven fabric products are non-woven geotextiles reinforced by polyester continuous filaments. The tensile strength is ≥8KNm, and the elongation is 40-60%, which fully meets the requirements of Jr/ To1g98 (Road Shigong Synthetic Material). The technical requirements for geotextiles in the application technical specifications).

When constructing geomembrane, we really need to pay attention to these details to avoid leakage problems.

Composite geomembrane is a composite impermeable material, woven or non-woven fabric is used as reinforcement material, and polyethylene is used as impermeable material. Most of the materials are one cloth and one film, and two cloth and one film. Laying impermeable membrane procedure: When laying the impermeable membrane, please make sure that there is no gap in the corner. If there are gaps, they should be filled in time during construction, and the laying order should be determined according to the specific conditions of the moisture content of the laying site. If there are pores, the air should be vented at the air bubble, and the anti-permeable membrane at the vent should be cleaned for subsidies.