100% polyester fabric Manufacturers

The anti-seepage geomembrane consists of an anti-seepage geomembrane composed of an upper non-woven fabric, a lower non-woven fabric and an intermediate plastic film.

Yangzhou Libo Environmental Protection Material Co., Ltd. has been focusing on research and production of reliable geosynthetic gasket products and systems for many years.(China shopping bag)

After the dam body is filled and the reservoir bottom is compacted to meet the design requirements, and the composite geomembrane impermeable body protective layer is prepared according to the design requirements, the construction technology of the composite geomembrane impermeable body is: the composite geomembrane is in place and the paving is straight → Butt joint, bottom fiber butt joint (stitching) → membrane material butt joint, hot melt pressure welding → inflation pressure (or negative pressure method) → surface fiber butt joint (sewing) → reserved capacity.

The anti-seepage geomembrane is made of polyethylene film as the base material, and is made of geotextile.

The anti-seepage geomembrane placed on the upstream surface of the dam at the initial stage will generate resistance along the slope of the upstream surface of the dam under the action of the slag body, and it will increase with the increase from the initial height of the dam. higher.

1. Lightweight: Polypropylene resin is used as the main raw material for production, with a specific gravity of only 0.9, which is only three-fifths of cotton. It is fluffy and feels good. 2. Soft: It is composed of fine fibers (2-3D) and is formed by light-point hot-melt bonding. The finished product is moderately soft and comfortable. Polypropylene non-woven fabric Polypropylene non-woven fabric