Artificial Landscape Grass Manufacturers

The polyethylene geomembrane manufacturer uses a brand-new PE material to make a 6-meter plastic film for use in anti-seepage projects. The thickness of the film is 0.75mm to 2.0mm. Geomembrane is a kind of high molecular polymer material.

Composite geomembrane is a composite impermeable material, woven or non-woven fabric is used as reinforcement material, and polyethylene is used as impermeable material. Most of the materials are one cloth and one film, and two cloth and one film. Laying impermeable membrane procedure: When laying the impermeable membrane, please make sure that there is no gap in the corner. If there are gaps, they should be filled in time during construction, and the laying order should be determined according to the specific conditions of the moisture content of the laying site. If there are pores, the air should be vented at the air bubble, and the anti-permeable membrane at the vent should be cleaned for subsidies.

Polyethylene geomembrane has the dual functions of waterproofing and preventing plant roots from penetrating. It can withstand the puncture of plant roots and maintain the waterproof function for a long time. It can form a high-strength waterproof layer, has a strong resistance to pressure water, and is resistant to puncture, cracking, tearing, and fatigue.

The geomembrane at the bottom of the reservoir can be laid after excavation and filling of the dam in the reservoir area.

After laying and connecting the composite geomembrane, immediately (within 48 hours) backfill the sand gravel or earth material protective layer.

The villagers built a small earth-rock dam on the river. After years of use and operation, many problems and defects have appeared. After investigation, a leak was found at the top of the dam.