stitchoond nonwoven fabric Manufacturers

The composite geomembrane extends from the bottom to the top.

With the development of large ships and the rapid economic development, some low-grade inland waterways can no longer meet the needs of cheap and large ships along the route.

Composite geomembrane is a composite impermeable material, woven or non-woven fabric is used as reinforcement material, and polyethylene is used as impermeable material. Most of the materials are one cloth and one film, and two cloth and one film. Laying impermeable membrane procedure: When laying the impermeable membrane, please make sure that there is no gap in the corner. If there are gaps, they should be filled in time during construction, and the laying order should be determined according to the specific conditions of the moisture content of the laying site. If there are pores, the air should be vented at the air bubble, and the anti-permeable membrane at the vent should be cleaned for subsidies.

When non-expandable damage causes water leakage, such as cracks or problematic joints, the system you use is an external waterstop, and the waterproof barrier is located in the external part above the fault area.

The anti-seepage geomembrane is made according to national standards and special requirements.

Because the plastic geotextile in the construction process, the polymer high score guild starts from the first row in the direction of thermal extension, which enhances the bond between the branches and realizes the compressive strength to catch up.