bag filters in cement industry Manufacturers

1. Excellent environmental adaptability: Most of the traditional geomembrane materials have a single performance, and there are not many methods that can be used.

As we all know, the main equipment for producing geomembrane in my country is divided into laminating machine and blown film machine. Of course, the equipment is getting more and more advanced, and the produced geomembrane has been greatly improved in terms of vision and physical chemistry. So, how are the blue and green impermeable geomembrane processed? In theory, in actual design, users usually design with black and green on the other side or blue on the other side. In addition, when the two sides are colored, they are used for special projects. It is called black green and black blue. If you simply produce reverse osmosis membranes with the same color on both sides, you can make a laminating machine. When producing black-green or black-blue impermeable membranes, blow molding equipment is required for processing. Special masterbatch materials and ultraviolet strong carbon black are added in the production process, which has excellent durability.

In many reservoirs, composite geomembrane uses plastic (thermoplastic polymer), rubber (thermosetting polymer) and composite geotechnical mechanics, but currently my country still widely uses geotechnical mechanics and composite geotechnical mechanics.

The most important feature of geomembrane as an anti-seepage material is that it has a good anti-seepage effect. Therefore, it is widely used for external waterproofing of dams, reservoirs and other projects. Moreover, the construction technology is simple, the requirements are not high, the cost is low, and the waterproof effect is good.

The same geomembrane product can be used in different places, and different geomembrane products must be used in the same place.

There are two ways to lay composite geomembrane on the upstream dam surface of the earth dam. The other is laying perpendicular to the dam axis (horizontal laying). There are 7 anti-slip tooth grooves on the upstream slope, and the tooth groove spacing is 5-10m. The bottom of the tooth groove is 1m wide and 0.8m deep. This project adopts the horizontal laying method, and the composite geomembrane must be folded 50cm and stretched at the upper end of the grazing.