bag filter industry dust Manufacturers

The high-density polyethylene anti-seepage geomembrane can not only play a moisture-proof effect in the septic tank of aquaculture farms, but also build a biogas tank when the septic tank is completely closed.

The polyethylene geomembrane manufacturer uses a brand-new PE material to make a 6-meter plastic film for use in anti-seepage projects. The thickness of the film is 0.75mm to 2.0mm. Geomembrane is a kind of high molecular polymer material.

Everyone said that HDPE anti-seepage geomembrane is mainly used as chemical sewage pond, landfill, fish pond, etc.

Composite geomembrane is a composite impermeable material, woven or non-woven fabric is used as reinforcement material, and polyethylene is used as impermeable material. Most of the materials are one cloth and one film, and two cloth and one film. Laying impermeable membrane procedure: When laying the impermeable membrane, please make sure that there is no gap in the corner. If there are gaps, they should be filled in time during construction, and the laying order should be determined according to the specific conditions of the moisture content of the laying site. If there are pores, the air should be vented at the air bubble, and the anti-permeable membrane at the vent should be cleaned for subsidies.

The anti-seepage geomembrane coil pipe connection device is used to connect the new and new membranes and the new and old membranes of the engineering anti-seepage system to block the leakage channels established by the unstable connection between the new and new membranes and the new and old membranes to improve the anti-seepage geotechnical Deformation adaptability and anti-seepage level of membrane joints, prevent and control common defects of project anti-seepage quality, improve project quality, ease office environment, and reduce project cost.