Impermeable Geomembrane Manufacturers

As we all know, the main equipment for producing geomembrane in my country is divided into laminating machine and blown film machine. Of course, the equipment is getting more and more advanced, and the produced geomembrane has been greatly improved in terms of vision and physical chemistry. So, how are the blue and green impermeable geomembrane processed? In theory, in actual design, users usually design with black and green on the other side or blue on the other side. In addition, when the two sides are colored, they are used for special projects. It is called black green and black blue. If you simply produce reverse osmosis membranes with the same color on both sides, you can make a laminating machine. When producing black-green or black-blue impermeable membranes, blow molding equipment is required for processing. Special masterbatch materials and ultraviolet strong carbon black are added in the production process, which has excellent durability.

Many users generally ask some manufacturers early when purchasing composite geomembrane.

In some waterproofing layer engineering projects, carbon black is added to the material of HDPE anti-seepage geomembrane.

1. Polyester non-woven fabric is the golden partner of drainage board, which can filter water and hold the soil layer. The colors are generally black, yellow, white, gray, etc. Minimum specifications: width; 2 meters, 100 meters long. 2. Polyester non-woven fabric products are non-woven geotextiles reinforced by polyester continuous filaments. The tensile strength is ≥8KNm, and the elongation is 40-60%, which fully meets the requirements of Jr/ To1g98 (Road Shigong Synthetic Material). The technical requirements for geotextiles in the application technical specifications).

Film welding method 1. The welding temperature, speed and pressure are determined after experiments and inspections. 2. The welding should be stopped when the ambient temperature is too high or too low. 3. The welding rod is the same as the membrane material. 4. Every piece of oilfield impermeable membrane is welded on the day of laying. 5. The edge of the upper impermeable membrane at the weld should be polished to an inclination angle of 45° to improve the welding quality of the weld.