Stitchbond roofing fabrics

Stitchbond roofing fabrics is a stitch-bonded, high-performance fabric for use in cold applied restoration roofing and roof maintenance systems. stitchbond roofing fabrics comes with lay lines for one and two ply roof systems. It is ideal as the reinforcing component in cold process roofing and repair when used with water-based asphalt emulsion, acrylic coating,solvent type coatings,or mastics.Tear strength, puncture resistance,and tensile strength combined with elongation.stitchbond roofing fabrics has been shown in tests with asphalt emulsion and cutbacks to be far superior to conventional roofing felts weighing five to seven times as much.FABRIC is a polyester that will readily conform to irregular surfaces and standing seam metal roof decks.It is also much easier to handle and apply properly than other soft polyester sheets.

Stitchbond roofing fabrics USAGE:

 Over the properly prepared surface, apply a coat of Asphalt Emulsion at a rate of 6 gallons per 100 square feet.Immediately following and starting at the low edge of the roof,embed a full width of polyester felt continuing up the roof with full width sheets stopping 6” above the Cant Strip.Do not walk on the polyester during application while mulsion is still wet causing  displacement  of the Emulsion.Do not apply a top coat of emulsion to the polyester.  Allow for proper curing time  24-72 hours weather dependent. Rinse the Emulsion removing any light oils.