Geomembrane

Introduction to the use range of impermeable geomembrane

2020-09-16
The scope of application of impermeable geomembrane, HDPE geomembrane
1. Geomembrane is suitable for environmental protection and sanitation. For example, landfills, sewage treatment plants, power plant conditioning ponds, industrial and hospital solid waste.
2. The impermeable membrane is suitable for waterproofing. For example, anti-seepage, blockage, rivers, lakes, reservoirs, dam reinforcement, waterway anti-seepage, vertical core walls, slope protection, etc.
3. Impermeable membrane is suitable for urban projects: subways, underground constructions of buildings, planting roofs, preventing roof gardens from permeating, sewage pipes.
4. Polyethylene impermeable membrane is suitable for gardens: artificial lakes, rivers, reservoirs, golf course pond bottoms, slope protection, green lawns, etc.
5. High-density polyethylene geomembrane is suitable for petrochemical products. Chemical plants, refineries, oil storage tanks, chemical reaction tanks, settling tank linings, secondary linings, etc.
6. Polyethylene geomembrane is suitable for mining industry: washing tanks, sedimentation leaching tanks, ash piles, melting tanks, sedimentation tanks, storage yards, tail lining prevention, etc.
7. Low-density polyethylene film is suitable for transportation: highway foundation reinforcement to prevent underdrain penetration;
8. Anti-seepage membrane is suitable for agriculture: anti-seepage of reservoirs, drinking water reservoirs, reservoirs and irrigation systems.
9. This movie is suitable for the aquaculture industry. Intensive factory farming ponds, fish ponds, shrimp pond lining, slope protection of Namako ring, etc.

10. High-density polyethylene impermeable membrane is suitable for salt industry. Salt field crystallization pond, salt pond cover, salt film, salt pond plastic thatch film.


Impermeable Geomembrane

HDPE Geomembrane High-density HDPE geomembrane is formulated on the basis of conventional impermeable membranes, using high-quality low-pressure high-density polyethylene raw materials, the main component is 97.5% high-density polyethylene, about 2.5% carbon black, resistant Penetrating anti-aging agents, antioxidants, ultraviolet absorbers, stabilizers and other auxiliary materials are produced in today's internationally advanced automated ground production equipment using three-layer co-extrusion technology. The production line is highly automated, fully controlled by a computer, from order entry, formula, feeding, processing to quality monitoring, and strictly operates according to scientific data. In addition, new raw materials (super tensile strength) such as Metalocence, traditional PE, EVA and LLDPE can be used at the same time. All products are manufactured in accordance with American ASTM D standards and comply with national standards. The product specifications are complete, with a thickness of 0.08mm to 5.0mm and a width of 4m to 8m, which can meet the requirements of artificial landscape, sewage treatment, water storage engineering, environmental sanitation, mining and chemical industry. Project requirements ◇High mechanical strength and adaptability to various products ◇Strong resistance to chemical corrosion ◇Excellent anti-permeation and waterproof effect ◇Long service life ◇Non-toxic and environmentally friendly.
In the past ten years, the rate of harmless treatment of urban waste in China has been greatly improved. In 1991, the detoxification rate of urban garbage was less than 3%, and in 1998 it basically reached 20%. Since 1996, China has begun to apply high-density polyethylene (HDPE) geomembrane to municipal polyethylene waste sanitary landfills. This has greatly improved the technical level of disposal in China's municipal waste sanitary landfills.

[email protected]